HP UX Developer Tools manual Diagnostic Messages

		Diagnostic Messages
		Limit Error Messages
	ACTION	Check for full file system
		(HPUX-MPE/iX) or too small object
		file (MPE/iX).
7205	MESSAGE	unable to allocate space for
		object in RL. (7205)
	CAUSE	I/O error writing to RL.
	ACTION	Check for too small RL file (MPE/iX).
7206	MESSAGE	unable to add object to RL.
		(7206)
	CAUSE	I/O error writing to RL.
	ACTION	Check for too small RL file or write
		permission (MPE/iX).
7207	MESSAGE	object is too big to fit into
		RL. (7207)
	CAUSE	Object size is too large for the RL
		requested.
	ACTION	Check for too small RL file or split
		object up (MPE/iX).
7208	MESSAGE	Internal error while reading
		%1s (7208)
	CAUSE	An error condition was returned
		while attempting to open or read data
		from an object file.
	ACTION	Check status of the object files used
		to build this program. You might also
		try recompiling the source file.
7209	MESSAGE	Out of memory while reading
		%1s (7209)
	CAUSE	Compiler ran out of virtual memory
		while reading ISOM file.
	ACTION	See message 7200.
7210	MESSAGE	Internal error while writing
		%1s (7210)

Chapter 8 185