ClusterPack V2.5 Release Note
Comprehensive Install Instructions
•Configure Cluster Management Software tools. The Management Server components of HP System Management Tools (HP Systems Insight Manager) is also configured if selected.
•Print a PASS diagnostic message if all of the configuration steps are successful.
Overview
Provide the following information to the manager_config program:
•The path to the license file(s)
•Whether to store passwords
•The DNS domain and NIS domain for the cluster
•The host name of the manager and the name of the cluster
•The cluster LAN interface on the Management Server
•The count and starting IP address of the Compute Nodes
•Whether to mount a home directory
•The
Details
This tool can be invoked in two ways, based on your specific requirements.
•(Not recommended) If you want manager_config to drive the allocation of hostnames and IP addresses of the Compute Nodes in the cluster (based on some basic questions), /opt/clusterpack/bin/manager_config is invoked with no arguments.
%/opt/clusterpack/bin/manager_config
•If you want manager_config to assign specific hostnames and IP addresses to the Compute Nodes in the cluster, supply an input file in the same format as /etc/hosts, and invoke the tool as follows:
%/opt/clusterpack/bin/manager_config -f <input_file>
•The ClusterPack DVD is no longer required during installation. On the source machine, unmount the DVD drive and remove the DVD.
%/sbin/umount /mnt/dvdrom
24