ClusterPack V2.5 Release Note
Comprehensive Install Instructions
•Keyboard selection: The keyboard selection is US English.
•Time Zone: The time zone information is determined based on the setting of the Management Server.
•Time: The current time is accepted. The time will later be synchronized to the Management Server using NTP.
•Networking: The LAN card specified will be configured to the IP address specified through manager_config.
•Hostname: The hostname will be set to the name specified through manager_config.
•Root password: The password will be queried before the nodes are booted.
Overview
Use the clbootnodes program to power up all Compute Nodes that have a connected MP that you specified in the previous step. It will answer the first boot questions for all the nodes automatically.
Provide the following information to the clbootnodes program:
•Language to use
•Hostname
•Time and time zone settings
•Network configuration
•Root password
Details
To run clbootnodes, use the following command:
%/opt/clusterpack/bin/clbootnodes
Before booting the nodes, clbootnodes will ask you for the root password to set on the Compute Nodes and the LAN card to configure for networking for each host. The LAN card choice for each host will be set to the IP address specified earlier via manager_config.
You can omit the argument list, in which all the nodes in the cluster will be processed. The IP address will be the one that you provided previously. The program will interact with you to obtain the name of the LAN card to use.
28