ClusterPack V2.5 Release Note
Comprehensive Install Instructions
the /etc/hosts file. This name is derived as the name of the associated host appended with
Overview
Provide the following information to the mp_register program about each MP card that is connected to a Compute Node. It will configure all of the MPs automatically, instead of requiring you to manually connect the MP to a serial console device.
•IP address
•Netmask
•Gateway IP address
Details
For each node, the utility will ask you if you want to establish an MP for that machine. It will also ask if the MP is already configured. If it is not already configured, you will be prompted to connect a serial cable from the serial port of the Management Node to the serial port of the MP to be configured. The program will then use the information you entered about the card to configure it. Each MP can be configured in turn. MPs which have been previously configured can be added to the database without being configured.
Before invoking mp_register to initially configure the MP cards on each Compute Node, obtain a serial cable long enough to connect from the serial console port on the back of the Management Server to the serial console port on the MP card of each Compute Node.
When you are ready to run mp_register, use this command:
%/opt/clusterpack/bin/mp_register
Step 12. Power Up the Compute Nodes
Background
the clbootnodes utility is intended to ease the task of booting Compute Nodes for the first time. To use clbootnodes, the nodes’ MP cards must have been registered and/or configured with mp_register
26