DLPI Primitives
Connection-mode Service Primitives
Format
The message consists of one M_PROTO message block containing the structure shown below.
typedef struct { |
|
ulong | dl_primitive; |
} dl_reset_req_t; |
|
Parameters
dl_primitive
DL_RESET_REQ
State
The message is valid in state DL_DATAXFER.
New State
The resulting state is DL_USER_RESET_PENDING.
Response
If the disconnect is successful, DL_OK_ACK is sent to the DLS user resulting in state DL_IDLE.
If the request fails, DL_ERROR_ACK is returned, and the resulting state is unchanged.
Reasons for Failure
DL_OUTSTATE
The primitive was issued from an invalid state.
DL_SYSERR
A system error has occurred and the UNIX system error is indicated in the DL_ERROR_ACK.
DL_RESET_IND
Informs the DLS user that either the remote DLS user is
Format
Chapter 2 | 123 |