HP UX 11i v2 Networking Software manual Dlhpsetackthreshreq, DLOUTCONPENDING, Dlinconpending

DLPI Primitives

Connection-mode Service Primitives

maximum allowed number of retries before re-setting the connection. This is sometimes known as the N2 variable.

	The message is valid in the states DL_IDLE, DL_DATAXFER,
	DL_OUTCON_PENDING, DL_INCON_PENDING,
	DL_USER_RESET_PENDING, and DL_PROV_RESET_PENDING.
	New State
	The resulting state is unchanged.
	Response
	If the primitive is issued from a valid state, the DLS provider responds
	with a DL_OK_ACK. Otherwise a DL_ERROR_ACK is returned.
	Reasons for Failure
	DL_OUTSTATE
	Primitive was issued from an invalid state.
	DL_HP_SET_ACK_THRESH_REQ
	Requests the DLS provider to set the acknowledgment threshold to the
	specified value.
	Setting the ack thresh will not affect the local window size.
NOTE
	Format
	typedef struct {
	u_long	dl_primitive;
	u_long	dl_ack_thresh;

} dl_hp_set_ack_thresh_req_t;

Parameters dl_primitive

DL_HP_SET_ACK_THRESH_REQ dl_ack_thresh

maximum number of I PDUs that can be received before an acknowledgment is sent. If this threshold is reached, an acknowledgment is sent and the SEND_ACK timer is restarted. This value cannot be greater than the remote receive window size.

State

104 Chapter 2