HP Data Center Connection Manager Software Products manual Publication Number

Page 2

© Copyright 2009, 2012, Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without�notice. All Rights Reserved.

This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of Hewlett-Packard.

Publication Number

5998-3265 March 2012

Applicable Products

HP ProCurve Datacenter Connection Manager Controller (J9445A)

Disclaimer

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard.

Trademark Credits

Microsoft, Windows, Windows NT, and Windows XP are U.S. registered trademarks of Microsoft Corporation.

Safety

Before installing and operating this product, please read “Read and follow the installation precautions outlined below.” on page 1-12 and the safety statements in Appendix C, “Safety and EMC Regulatory Statements.”

Warranty

See the Customer Support/Warranty booklet included with the product.

A copy of the specific warranty terms applicable to your Hewlett- Packard products and replacement parts can be obtained from your HP Sales and Service Office or authorized dealer.

Open Source Software Acknowledgment Statement

This software incorporates open source components that are governed by the GNU General Public License (GPL), version 2. In accordance with this license, ProCurve Networking will make available a complete, machine-readable copy of the source code components covered by the GNU GPL upon receipt of a written request. Send a request to:

Hewlett-Packard Company, L.P.

Wireless Edge Services xl Module Program GNU GPL Source Code

Attn: ProCurve Networking Support

MS: 5550

Roseville, CA 95747 USA

Hewlett-Packard Company 8000 Foothills Boulevard Roseville, California 95747 http://www.hp.com/networking

Page 1 Page 3
Image 2
Page 1 Page 3
Contents HP ProCurve Datacenter Connection Manager Controller Publication Number Contents HP ProCurve Datacenter Connection Manager Controller Shows how this process worksHP ProCurve Datacenter Connection Manager Controller Both guides are available at Hardware Hardware SpecificationsPhysical Dimensions Environmental Guidelines USB PortElectrical AcousticLEDs SafetyEthernet Ports LCD Menu and Configuration Buttons Console PortSerial Number and MAC Address Warranty and Support Contact Support Through Email or Telephone Software ReleasesQuick Start Hardware Installation and Initial Setup R n i n g U t i o n s Summary of IP Configuration Methods Configuration Method Description InstructionsPanel LCD Menu Configuration Select IP Address-Port Setting new IP IP Address OK11. Panel LCD Menu Ping Test U t i o n Enter https//IP address8181/dcmWeb as the URL 14. The Login Window for the Web Browser Interface Next StepsQuick Start Hardware Installation and Initial Setup Detailed Hardware Installation and Initial Setup Steps Overview Ensure That You Have All the PartsPrepare the Installation Site Power cord, one of the followingRead and Follow the Installation Precautions Summary of Cable Types to Use with the DCM ControllerMount the Unit Mounting the DCM Controller in a RackMounting the DCM Controller on a Horizontal Surface DCM Controller with Mounting BracketsConnect the Network Cable Connect the DCM Controller to a Power SourceConfigure the IP Settings Using the LCD Menu Front Panel LCD and ButtonsPanel LCD Menu Configuration Select IP Address-Port Panel LCD Menu Configuration IP Address-Port 1 Gateway 10. Panel LCD Main Menu Select Ping Test Using the Console Interface Press 1 for Configuration and then 1 for IP Configuration Application Main Menu is displayed15. Configuring IP Address in the Console Interface Enter Press 1. Ping TestRun the Initialization Script 17. Ping Test Output Showing a Successful Test18. Establishing a Console Connection to Access the Root CLI Access the DCM Controller’s Web browser interface Specify the Radius Clients19. The Login Window for the Web Browser Interface Detailed Hardware Installation and Initial Setup Steps Using the Backup Script Backing Up and Restoring DCM Controller DataU t i o n T e Using the Restoration Script Using the Support Script Recovering DCM Controller Drive is now bootableInsert the USB drive into the USB port on DCM Controller Manually Editing DCM Controller Files Manual InitializationLocate the last two lines that show the IP address and Fqdn Common Linux Commands Table B-1. Common Linux Commands Action CommandVi Editor Command ModeTable B-2. vi Editor Commands Insert Mode Replace ModeSafety and EMC Regulatory Statements Safety InformationInformations concernant la sécurité EMC Regulatory StatementsHinweise zur Sicherheit Considerazioni sulla sicurezza Consideraciones sobre seguridad Resultar en averías al equipoSafety Information Japan Safety Information China Australia/New Zealand EMC Regulatory StatementsCanada JapanKorea Taiwan Safety Waste Electrical and Electronic Equipment Weee Statements Recycle StatementsRecycle Statements Recycle Statements Descarte de Lixo Elétrico na Comunidade Européia Index Index Management and Configuration Guide 5998-3265

Data Center Connection Manager Software Products specifications

HP Data Center Connection Manager (DCM) is a crucial software solution designed to optimize the management and performance of data center environments. As organizations increasingly rely on data centers to support their digital transformation initiatives, DCM provides a comprehensive suite of tools to streamline operations, enhance resource utilization, and improve overall efficiency.

One of the main features of HP DCM is its ability to automate the management of data center connections. The software facilitates the integration of various hardware components, including servers, storage systems, and networking devices, allowing for seamless communication and data flow. This automation reduces the risk of human error, minimizes downtime, and enhances the reliability of critical systems.

Another key characteristic of HP DCM is its robust reporting and analytics capabilities. The software provides real-time insights into data center performance metrics, including power consumption, temperature, and resource utilization. These analytics help IT administrators identify potential issues before they escalate, enabling proactive maintenance and optimization of resources. With customizable dashboards, users can visualize and track performance trends, making informed decisions to enhance operational efficiency.

HP DCM also supports advanced security features to safeguard data center environments. The software employs encryption protocols and access controls to protect sensitive information from unauthorized access. Furthermore, it integrates seamlessly with existing security frameworks, ensuring compliance with industry standards and regulations.

The technology underpinning HP DCM is built upon a modular architecture that allows for scalability and flexibility. As businesses grow and evolve, the software can be easily adapted to accommodate new technologies and changing needs. This makes it an ideal solution for organizations looking to future-proof their infrastructure.

Additionally, HP DCM offers comprehensive support for virtualization technologies, enabling IT teams to manage virtualized environments more effectively. The software streamlines the deployment and management of virtual machines, improving resource allocation and reducing operational costs.

In conclusion, HP Data Center Connection Manager is an essential software solution for organizations seeking to optimize their data center operations. With its automation capabilities, advanced analytics, robust security features, and support for virtualization, DCM empowers IT administrators to enhance efficiency, reduce costs, and respond quickly to changing business demands. As data centers continue to evolve, HP DCM remains a vital tool for maintaining a competitive edge in the digital landscape.
Top Page Image Contents