Detailed Hardware Installation and Initial Setup Steps
Overview
Figure 2-17. Ping Test Output Showing a Successful Test
d.To ping a different IP address, press Enter to return to the Diagnostics menu, and then repeat the steps to send a ping.
e.When you are finished, press Enter and 0 to return to the Main Menu.
f.Exit the console interface.
8.Run the Initialization Script
After you configure the DCM Controller’s IP settings, you must run an initializa- tion script to configure the DCM Controller with settings for your environment. (You can also configure these settings manually if you prefer. See “Manual Initialization” on page
1.Use terminal software such as Tera Term or PuTTY to establish one of the following sessions with the DCM Controller.
•A Secure Shell (SSH) session to the DCM Controller’s IP address
•A console session (connecting your management station to the DCM Controller’s console port)