HP Data Center Connection Manager Software Products manual Using the LCD Menu

Detailed Hardware Installation and Initial Setup Steps

Overview

Table 2-2. Summary of IP Configuration Methods

Configuration Method Description Instructions

LCD menu	Locate the LCD menu on the front
	panel and press the configuration
	buttons to set the DCM
	Controller’s IP settings.

“Using the LCD Menu” on page 2-8

Console Interface	Establish a console session and	“Using the Console Interface”
	use a simply menu to configure	on page 2-12
	the DCM Controller’s IP settings.

Using the LCD Menu

The LCD menu on the DCM Controller’s front panel allows you to configure the controller’s IP address and its default gateway. It is easy to navigate using buttons on the front panel of your DCM Controller. (See Figure 2-4.)

■To access the menu or select a menu option, press the accept button (the button with a check mark on it).

■To scroll up or down through a menu list, push the up arrow or down arrow buttons, respectively.

■An arrow (->) on the LCD screen indicates the selected item in a menu or options list.

■To cancel an action, press the x button.

Figure 2-4. Front Panel LCD and Buttons

To configure the IP settings, complete the following steps:

1.Press the right-arrow button to access the Configuration menu.

If necessary, press the cancel button to move back a screen or the accept button to access the main menu.

2-8