HP Cluster Software manual Common objects, Specifying object values

Specifying object values

You do not need to change the default settings unless you want to change the degree of protection for your Remote Copy volume group members. If you change an object, you may need to change additional objects as well. For example, if RESYNCWAIT has been specified for the ApplicationStartup object, the ResyncWaitTimeout object must be specified.

Objects are supported according to the requirements or capabilities of the cluster software, as indicated in Table 3 (page 48).

Table 3 Common and application objects

Object		CLI	Windows Cluster
COMMON		•	•
	LogDir	•	•
	LogLevel	•	•
APPLICATION		•	•
	ApplicationDir	•	•
	ApplicationStartup	•	•
	ClusterNotifyCheckTime		•
	ClusterNotifyWaitTime		•
+	DC_A_Hosts	•	•
+	DC_B_Hosts	•	•
+	DC_A_InServStorage_SerNum	•	•
+	DC_B_InServStorage_SerNum	•	•
+	RCVolumeGroupA	•	•
+	RCVolumeGroupB	•	•
	PostExecCheck	•	•
	PostExecScript	•	•
	PreExecScript	•	•
	ResyncWaitTimeout	•	•
	StatusRefreshInterval		•
	UseNonCurrentDataOk	•	•
	HP3PARCLICommandTimeout	•	•

+Required

•Supported

COMMON objects

The COMMON section is used to set the environment of HP 3PAR Cluster Extension.

The COMMON tag can appear in the configuration file only once. The COMMON object does not require any value.

Objects of the type COMMON can appear only one time. Those objects must be placed after the COMMON tag in the configuration file.

If the default values fit your environment, there is no need to specify them in the file.

48 User configuration file and HP 3PAR Cluster Extension objects