How to use the scanner
3 |
1 | 2 |
4
HP Scanjet 4650/4670 scanner
1Scanner
2Vertical holder, with folding legs for storage. Used for positioning and holding items for scanning
3Optional transparent materials adapter (TMA) for scanning 35 mm slides and negatives.
4Power supply
Place the scanner in the holder
Note The holder can be used for holding the scanner, positioning items to scan, and providing a flat surface on which to scan. The holder is not necessary for scanning.
Place the scanner in the horizontal holder (HP Scanjet 4600/4630)
1Set the horizontal holder on a flat surface. Make sure the hinge in the holder is rotated
forward.
2 Lay the scanner on the holder, viewing side (light frame) up (
), in contact with the hinge. The buttons face away from the hinge. The cord exits the scanner next to the hinge.
3Press the back of the scanner down until it clicks into place in the hinge.
Place the scanner in the vertical holder (HP Scanjet 4650/4670)
1Make sure both legs are fully extended before placing the scanner in the holder. This ensures the holder is stable. Open the support legs by rotating them into place:
a Open the rear support first, and then make sure it clicks into the fully open position.
b Rotate the front support from behind the holder to the front of the holder until it clicks into place.
2 Set the holder on a flat surface.
User's Manual | 3 |