maintenanceactivities.
filter cover hooks
1)Clean or replace filter
If the air filter is blocked with a lot of dust, the airflow volume will reduce. It is recommended to clean the filter once every two weeks or as needed.
a)Push down the two tabs on the filter cover and pull outwards to remove the entire filter and cover.
b)Carefully, take the air filter out of the filter cover.
c)Wash the air filter by immersing it gently into warm (about
104 F) water with a neutral detergent. Rinse the filter and dry it thoroughly in a shaded place.
d)Attach the filter to the filter cover with the attachment hooks on the inside surface of the cover.
e)Place the bottom of the filter cover into the
holes in the unit case. Push the cover back into its original position.
f)If the filter is torn or unusable, order a new filter by calling the contact section of this manual.
2)Case
a)Keep the unit from being exposed directly to the sun for possible color fading.
b)Clean the surface with a damp cloth. Dry it with a soft towel.
3)Storing the Unit for an Extended Period of Time
a)Ensure that the water tank is empty.
b)Unplug the unit.
c)Remove the stopper from the internal water drain piping (Black Pipe) inside the water tank compartment and drain the water from the pipe. Reinsert the stopper back to the black drain- pipe.
d)The unit should be stored in a cool dry place.
NOTE: During normal operation do not drain water from the water black drainpipe. This water is
retained for the refrigerant coil cooling purpose only.
13