Install the Power Line

◆Installation

1.Remove the front side plate.

2.Break through the hole for wires and put on the rubber bushing.

3.Pull all wires through the rubber bushing.

4.Remove the wire clamp and connect the end of the power connection cord with screws to the wiring terminal board according to the “WIRING DIAGRAM” of the outdoor unit.

5.Make sure that the wiring has been connected properly.

6.Tighten the wire with clamp and clasp.

7.After the wiring crosses through the Connector, tighten the Connector with the fix nut.

Install the Indoor Unit

1.When routing the piping and wiring from the left or right side of the indoor unit, cut off the tailings from the chassis as necessary (shown in Fig.3).

① Cut off tailing 1 when only power cord is routed.

②Cut off tailing 1 and 2 when connect pipe and power cord are routed.

2.Wrap the piping and wiring and pull them through the cut-off tailings hole (shown in Fig.4).

3.Hang the 2 mounting slots of the indoor unit on the upper tabs of the rear panel and check that it is securely fastened.

4.The height of the installed location should be 7.55 feet or more from the floor.

-18 -

KFHHP-22-ID, KFHHP-22-OD specifications

The Soleus Air KFHHP-22-OD and KFHHP-22-ID are two innovative cooling and heating solutions designed to offer efficient climate control for both domestic and commercial spaces. These models are part of Soleus Air's commitment to delivering high-quality, energy-efficient products that cater to diverse environmental needs.

A standout feature of both models is their versatile functionality, providing not just cooling but also heating capabilities. This dual functionality makes them ideal for year-round use, ensuring comfort in varying temperatures, which is particularly beneficial in regions with extreme climate conditions.

In terms of design, both the KFHHP-22-OD and KFHHP-22-ID units are compact and modern, ensuring they fit seamlessly into any space. The sleek appearance is complemented by user-friendly controls that facilitate easy operation. The convenience of remote control operation further enhances user experience, allowing adjustments from anywhere in the room.

One of the most notable technologies featured in these units is the advanced inverter technology, which optimizes energy consumption by adjusting the compressor speed based on the cooling or heating demand. This not only contributes to significant energy savings but also helps maintain a consistent temperature, providing enhanced comfort.

Noise reduction is another critical aspect that Soleus Air has prioritized in the KFHHP-22 models. Both units operate quietly, ensuring that they do not disrupt the peace of your environment, whether it be at home or in a professional setting. This makes them suitable for bedrooms, offices, or any quiet space where noise can be a concern.

Installation and maintenance are simplified thanks to the design of these units. The easy-to-follow installation manual means that users can set them up with minimal hassle. Additionally, regular maintenance is streamlined, allowing users to enjoy prolonged performance and efficiency.

Another characteristic worth mentioning is their effectiveness in dehumidifying the air. This is particularly advantageous in humid climates, as it not only improves comfort levels but also helps prevent mold and mildew growth.

In summary, the Soleus Air KFHHP-22-OD and KFHHP-22-ID models stand out for their energy efficiency, dual functionality, modern design, quiet operation, and ease of use. With advanced technologies that enhance comfort and control, they represent a smart investment for anyone seeking reliable and versatile climate control solutions.