Soleus Air KFHHP-22-OD, KFHHP-22-ID installation manual Air Purging and Leakage Test

Page 22

◆Installation

Air Purging and Leakage Test

1.Connect charging hose of manifold value to charging end of low pressure valve (both high/low pressure valves must be tightly shut).

2.Connect joint of charging hose to vacuum pump.

3.Fully open handle of Lo manifold valve.

4.Open the vacuum pump to evacuate. At the beginning, slightly loosen joint nut of low pressure valve to check if there is air coming inside. (Valve of vacuum pump changes from negative to 0) Then tighten this nut.

5.After finishing evacuation, shut Lo handle of manifold valve to stop the vacuum pump.

(1)Keep evacuating for 15 minutes and make sure the reading of multi-meter is -1.0 x 14.5 PSI (-76cmHg).

6.Fully open high/low pressure valves.

7.Remove charging hose from charging end of low pressure valve.

8.Tighten bonnet of low-pressure valve.

- 20 -

Image 22

Contents Wall Mounted Mini Split Heat Pump Air Conditioner Indoor Unit Outdoor UnitTable of Contents Instructions before Use Carefully read the following instructions before useInstructions before Use Description of Air Conditioner Components Remote Control Operation Function-Remote controlRemote Control Operation How to Insert Batteries General ProcedureUser Notices Care and Maintenance WashingTrouble Shooting Trouble ShootingProblem Check before UseTrouble Shooting Specifications and Technical Data KFHHP-22-ID / KFHHP-22-ODInstallation Services Installation DiagramIndoor Unit Installation LocationOutdoor Unit Install the piping hole InstallationInstall the rear panel Install the drainage hoseWiring of indoor unit Operation ProceduresElectric Wiring WireWiring of Outdoor unit Install the Power Line Install the Indoor UnitInstall the Outdoor Unit Install the connection pipeAir Purging and Leakage Test Test Operation and Check after Installation Test OperationElectrical Schematic Diagram Indoor Unit Electrical Schematic Diagram Outdoor Unit Warranty

KFHHP-22-ID, KFHHP-22-OD specifications

The Soleus Air KFHHP-22-OD and KFHHP-22-ID are two innovative cooling and heating solutions designed to offer efficient climate control for both domestic and commercial spaces. These models are part of Soleus Air's commitment to delivering high-quality, energy-efficient products that cater to diverse environmental needs.

A standout feature of both models is their versatile functionality, providing not just cooling but also heating capabilities. This dual functionality makes them ideal for year-round use, ensuring comfort in varying temperatures, which is particularly beneficial in regions with extreme climate conditions.

In terms of design, both the KFHHP-22-OD and KFHHP-22-ID units are compact and modern, ensuring they fit seamlessly into any space. The sleek appearance is complemented by user-friendly controls that facilitate easy operation. The convenience of remote control operation further enhances user experience, allowing adjustments from anywhere in the room.

One of the most notable technologies featured in these units is the advanced inverter technology, which optimizes energy consumption by adjusting the compressor speed based on the cooling or heating demand. This not only contributes to significant energy savings but also helps maintain a consistent temperature, providing enhanced comfort.

Noise reduction is another critical aspect that Soleus Air has prioritized in the KFHHP-22 models. Both units operate quietly, ensuring that they do not disrupt the peace of your environment, whether it be at home or in a professional setting. This makes them suitable for bedrooms, offices, or any quiet space where noise can be a concern.

Installation and maintenance are simplified thanks to the design of these units. The easy-to-follow installation manual means that users can set them up with minimal hassle. Additionally, regular maintenance is streamlined, allowing users to enjoy prolonged performance and efficiency.

Another characteristic worth mentioning is their effectiveness in dehumidifying the air. This is particularly advantageous in humid climates, as it not only improves comfort levels but also helps prevent mold and mildew growth.

In summary, the Soleus Air KFHHP-22-OD and KFHHP-22-ID models stand out for their energy efficiency, dual functionality, modern design, quiet operation, and ease of use. With advanced technologies that enhance comfort and control, they represent a smart investment for anyone seeking reliable and versatile climate control solutions.