HP 1000 manual Photo brightness, Factory default settings, To adjust the photo brightness

Page 26

hp photosmart 1000 color printer user’s guide

Photo brightness

If you want your photos to print lighter or darker than the originals, adjust the photo brightness.

To adjust the photo brightness:

1. On the printer front panel, press Tools until the LCD asks if you want to adjust the photo brightness, then press OK/Yes.

2.

Press the right side of the Tools button to lighten your photos or the left side of

 

OK/Yes

 

the Tools button to darken your photos.

 

button

 

 

 

3.

Press OK/Yes.

 

Tools

 

 

 

Factory default settings

 

button

 

 

 

You can reset the printer to the original factory settings.

To use the factory settings:

1. On the printer front panel, press Tools until the LCD asks if you want to reset all the tools settings.

2.Press OK/Yes.

The factory settings are as follows:

•No default paper type or size (the printer asks you the paper type and size each time).

•Photo Album page layout.

•Middle photo brightness setting.

20

www.hp.com/photosmart

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Knowledge HP Customer Care Help Us Help You BetterContents Printing directly from the printer Saving photos Specifications, regulatory and warranty information Chapter Unpacking your printer Before you begin, check to be sure you have the followingMemory cards Other items you will needCables HP paperPrinter parts Photo trayPower cord connection Cancel/No Front panelReading the indicator lights C6463A Installing the Two-Sided Printing Module optionalInstall the Two-Sided Printing ModuleCartridges Replacing or installing print cartridgesReplace or install print Insert the print cartridge Loading paper Load paper in the paper TrayLoad paper in the photo Load a single envelopeLoad a stack of envelopes Load index cards and other Small mediaHp photosmart 1000 color printer user’s guide Printing a test Adjusting printer settingsDefault paper type and size To print a testTo select the default paper type and size Layout To select the page layoutTo use the factory settings Factory default settingsTo adjust the photo brightness Photo brightnessInserting a memory card Understanding memory cardsTypes of memory cards CompactFlash Type I IBM Microdrive SmartMediaCard Insert a CompactFlashorIBM Microdrive memory CompactFlash IBM MicrodriveInsert a SmartMedia Memory cardTips for using infrared Understanding infraredPrinting directly from the printer Printing from a memory card Deciding which photos to printPrinting an index Print an indexChoosing photos on the printer’s front panel Choose all photos onA selected photo Choose individual photosChoose more than one copy Select a continuous rangeCanceling a photo Select a Dpof filePrinting photos Print photos from a Memory cardPrinting files using infrared IR Send photos to the printerPrint photos Hp photosmart 1000 color printer user’s guide Printing from a computer Printing from your Windows PC To print from your Windows PCSelecting the printer Properties Using the HP Photo Printing software Start the softwareCreate an album Make reprints of your Rotate your image Adjust the exposureAdjust the color Adjust the sharpness Scale your imageApplication Printing from your MacintoshPrint from a software Print from the desktop Using the Print dialog box Using the Two-Sided Printing Module optional Two-sided printingTo set up the HP PhotoSmart printer software Two-sided printing from your Windows PCHp photosmart 1000 color printer user’s guide Manually reloading paper to print the second side Two-sided printing from your Macintosh Select Print Both Sides Click the drop down menu to select Layout Saving photos Saving from a memory cardSaving photos from a memory card to your Windows PC To save photos from a memory cardTo save non-photo files Saving photos from a memory card to your Macintosh Saving photos using infrared Receiving and saving the file Saving photos Care and maintenance Using the HP PhotoSmart Toolbox Windows PCOpen the Toolbox using a Windows PCUsing the HP PhotoSmart Utility Macintosh To clean the print cartridges using the front panel Cleaning the printerCleaning the print cartridges Materials you will needTo clean the print cartridges manually To clean the print cartridge cradles Cleaning the print cartridge cradleCleaning the outside of the printer Troubleshooting Software solutions Problem Possible cause SolutionCorrectly With your virus protection Hardware solutions USB When I connected a USB Installation was not Computer. See the Appendix for system requirements Printing is very slow You may have chosen Printing solutions If you were printing labels, make sure a label did not Automatic Two-Sided Printing Module, to remove Application’s print settings Will be used Parts of the document are You may have selected Parts of the document are You may have accidentally Print quality is poor You may be running out Print quality is poor Your print cartridges may Print quality is poor If you have smearing, you Print your document Photos are not printing You may not have selected Automatic two-sided printing solutions Layout panel, you Unsupported paper type or Infrared IR solutions Error messages LCD Message Problem SolutionLCD Message Problem Solution Paper is too long. See PC Paper size is too long LCD Message Problem Solution Specifications Prints Color DimensionsWeight Technology, ColorRegulatory and warranty information Regulatory noticesHewlett-Packard Limited Warranty Statement Page Hp photosmart 1000 color printer user’s guide Connecting the printer to your Windows PC Parallel connection USB connectionSystem requirements Component RecommendedParallel cable Connecting the printerConnect the printer with a USB cableConnecting the printer to your Macintosh Connect the printer with a USB cable Connecting the printer to a power sourceInstalling the printer software Hp photosmart 1000 color printer user’s guide 102 Index Saving from a memory card Index Hp photosmart 1000 color printer user’s guide 106
Related manuals
Manual 8 pages 26.72 Kb Manual 96 pages 21.47 Kb Manual 105 pages 33.32 Kb

1000 specifications

The HP 1000 was a series of minicomputers produced by Hewlett-Packard from the early 1970s through the late 1980s. Originally introduced in 1973, the HP 1000 aimed to provide high-performance computing capabilities within the reach of small to medium-sized businesses and specialized industries. This machine was distinctive not only for its advanced technology but also for the versatility it offered in various applications.

One of the standout features of the HP 1000 was its architecture. The system utilized a 16-bit word size, which allowed for efficient processing and execution of instructions. The HP 1000 employed a unique architecture known as the "Hewlett-Packard 1000 Microprogrammed System," which enabled it to execute a broad range of instructions efficiently. This made the HP 1000 particularly well-suited for data processing applications, scientific calculations, and high-level computing tasks.

The HP 1000 series was fully modular, allowing users to customize and expand their systems as needed. It supported various input/output devices, memory sizes, and even offered options for solid-state disk drives, which were cutting-edge for that time. The system’s modularity not only provided flexibility but also enhanced maintainability, enabling users to swap out components without significant downtime.

Another key aspect of the HP 1000 was its support for a wide range of programming languages, including FORTRAN, COBOL, and BASIC. This made it appealing to a variety of users, from engineers who needed to perform complex calculations to business analysts focused on data management. Additionally, the HP 1000 was designed to run multiple jobs simultaneously, making it a precursor to modern multitasking operating systems.

Networking capabilities were also an essential characteristic of the HP 1000. The system could be connected to various peripherals and terminals, increasing its functionality in a networked environment. This helped businesses leverage the power of shared resources, facilitating collaborative projects and data sharing across departments.

In conclusion, the HP 1000 series played a significant role in the evolution of computing technology. Its modular design, robust architecture, support for multiple programming languages, and networking capabilities made it a versatile tool for a wide range of applications. For over a decade, the HP 1000 series marked an important chapter in the history of computing, laying the groundwork for advancements in minicomputer technology that would follow.
Top Page Image Contents