Installation Instructions (Continuous)
1. WINDOW REQUIREMENTS
•These instructions are for a standard
•The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions.
•All supporting parts must be secured to firm wood, masonry or metal.
•The electrical outlet must be within reach of the power cord.
2. STORM WINDOW REQUIREMENTS
A storm window frame will not allow the air conditioner to tilt toward the outside, and will keep it from draining properly. To adjust for this, attach a piece of wood to the stool.
WOOD PIECES WIDTH: 2"
LENGTH: Long enough to fit inside the window frame.
THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2" higher than the top of the storm window frame.
Attach securely with nails or screws provided by the installer.
3.REMOVE THE AIR CONDITIONER FROM THE CASE
A.Remove the locking screw and locking bracket from the lower frame. Save to reinstall later.
B.Remove the ground screw and save to reinstall later.
C.Slide the air conditioner from the case by gripping the base pan handle and pulling forward while bracing the case.
4. PREPARE THE WINDOW
Cut the window sash seal to the proper length. Peel off the backing and attach the seal to the underside of the window sash.
8