Driving Zebra Printers from Smart Forms
Bar Codes
Bar Codes are managed via transaction /nSE73. See the screen below:
© SAP AG 2004. All rights reserved.
Individual bar code “types” need to be created for each flavor of bar code. A Smart Style then needs to be created to include bar code “types” for each Node. Firstly you need to create/configure “printer bar codes” or “system bar codes.”
Printer Bar Codes
“Printer bar codes” are bar codes that are specific to a specific printer. These bar codes actually have the commands and parameters hard coded for each separate bar code symbology and derivative. This is known as SAP’s “old bar code technology.” You will also need to create new “printer bar codes” if you wish to change any parameters such as ratio, narrow bar width, or height. You should try and avoid this “old technology” if possible. See the screen below:
13760L | Page 48 |