HP Photosmart Pro B9180 Matte / Photo Black

HP Photosmart Pro B9180 - Matte / Photo Black

A General Guide for Printing on Hahnemühle FineArt Papers

Installing Profiles

Please refer to your printer manual for a detailed instruction how to install profiles for your printer.

Note:	Your graphic-application needs to be restarted if it was open when profiles were installed. New profiles will
	be detected automatically during the start of the application.

Settings

Print drivers will vary from printer to printer and from Macintosh to PC but the general setup will be the same. Be sure to select the proper profile for the printer, paper and ink combination you are using. In our profile names you will find the proper combination to use.

Example: Your Profile name is “HFA_HPB9180_MK_PhotoRag“. It says that you are using a Hahnemühle Profile (HFA)

for the HP B9180 printer (HPB9180) loaded with Matte / Photo Black and Photo Rag.

Print with Preview / General Settings:

1)Source Space: Document

2)Profile: regarding to your paper and ink combination

3,4) Rendering Intent, Black Point Compensation: Needs to be chosen regarding to the image you‘re using. Eventually you need to test. No recommendation possible.

Print Driver / Media Settings:

5)Media: Create your own paper with HP solu- tion center, media-type table on page -2-

6)Quality: optimal

7)Mode: Colormanagement Off

Note:	For traceable printing, please save the settings and recall these settings whenever you print. Varying these
	settings could affect the outcome of your image. There are other factors that can also affect the output, if
	needed please refer to you printer manual or image manipulation program for additional color management
	issues. The screen shots may vary in case of different systems.

April 2009 / Rev. 01