HP Panter 2Tier manual Lmstat, Reports status on license manager daemons and feature usage

FLEXlm Utilities

lmstat

Reports status on license manager daemons and feature usage

lmstat [–a] [–A] [–c license_file] [–f [feature]] [–l [reg_expression]] [–s [server]] [–S [daemon]] [–t timeout]

–a	Display everything.
–A	List all active licenses.
–clicense_file	Use the specified license file. If this switch is not specified, lmstat looks for the
	environment variable LM_LICENSE_FILE. If the environment variable is not set,
	lmstat looks for the file /usr/local/flexlm/licenses/license.dat.
–f[feature]	List all users of the specified features.
–l[reg_expression]	List all users of the features matching the given regular expression.
–s[server]	Display the status of the specified server nodes.
–S[daemon]	List all users of the specified daemon’s features.
–ttimeout	Specify the timeout interval, in seconds, during which daemons must complete
	their connections to each other. Default value is 10 seconds. A larger value might
	be desirable if the daemons are being run on busy systems or a very heavily loaded
	network.

Description	lmstat provides information about the status of the server nodes, vendor dae-
	mons, vendor features, and users of each feature. Information can optionally be
	qualified by specific server nodes, vendor daemons, or features.
	lmstat provides:
	` Total licenses available for each feature.
	` Who is using the license.
	` Who is using features served by a specific daemon.

Appendix C License Administration 69