HP 4050 manual Mopy Disk Error Messages

Mopy Disk Error Messages

The following table lists the disk error numbers reported on either the Printer Collation or Job Storage Disk Error page, which is printed when an error exists. Use the HP Resource Manager for management of the disk (see page 25).

Mopy Disk Error Messages

Disk

Error Error DescriptionSolution

Number

1Disk volume not present – it may be uninitialized.

•Hard disk: Initialize the hard disk. If problem persists, replace the hard drive.

•RAM disk: Power cycle the printer.

3	A file or directory asked for	• Possible data corruption, delete the job the
	could not be found.	error occurred with.
5	Invalid # of bytes given in a	• Possible data corruption, delete the job the
	read/write request.	error occurred with.
6	Attempt to create a file or	• The user has sent a username that is the
	directory that already exists.	same as an existing directory. Change the
		username in the driver and resend the job.
15	Bad Disk	• Hard disk: Initialize the hard disk. If problem
		persists, replace the hard drive.
16	No volume label	• Hard disk: Initialize the hard disk. If problem
		persists, replace the hard drive.
23	Bad seek request – the	• Possible data corruption, delete the job the
	resulting offset would be	error occurred with.
	negative.
24	Unexpected internal error	• Possible data corruption, delete the job the
		error occurred with.
		• Disk media problem – initialize the hard disk
		or reboot to reinit the RAM disk.
		• If the problem persists on a hard drive,
		replace the hard drive.
55	Bad file system	• Possible data corruption, delete the job the
		error occurred with.
		• Disk media problem – initialize the hard disk
		or reboot to reinit the RAM disk.
		• If the problem persists on a hard drive,
		replace the hard drive.
56	Hardware failure	• Replace the hard drive.

114 Chapter 4: Problem Solving

EN