HP 4350 manual Configuring the TowerTray Option

INSTALLATION

Configuring the TowerTray Option

Go to the Control Panel and select Printers. There click on the respective HP LaserJet

Printer.

Use the right mouse button to open the Settings. Then click on the hardware settings Icon. There choose the appropriate TowerTray you are using in the pull-down Window,

do the same as well with all the other printer equipment your are using (extension tray, duplex, etc.)

Choose the correct TowerTray) model.

Note: You must have the correct driver installed to do so.

After having done so the TowerTray trays need to be set on the correct paper size format.

Choose the appropriate paper size format (The paper format you are going to use in your TowerTray)

Now your TowerTray is ready for operation.

Note:

For further information on Tray and MediaType definition please refere to Appendix B – Tips and Hints of this manual.

Manual 0545 12 TowerTrayTM for the HP LaserJet 4200 / 4300 / 4250 / 4350