HP 4350 manual Position and Connect Printer, Arrangement of trays, Data Connection Without Stacker

Page 10

INSTALLATION

Position and Connect Printer

Warning:

The printer may weigh up to 34 kilograms (75 pounds). Enlist the help of a second person to lift the unit. To prevent back strain or injury, bend your knees when lifting the unit.

Note:

To meet requirements for absolute toppling security TowerTray has to be equipped with the supplied tilt protection (see picture). Also, never open more than one tray at the same time.

 

Note for HP LaserJet 4250 and 4350 users:

 

 

 

If you are using more than 2 additional HP Trays, then the

 

 

 

TowerTray / HP LaserJet unit has to be fixed to a building wall. To

 

 

 

do so, please refer to page 10 of this manual.

 

 

 

 

 

 

•

Carefully lift the laser printer onto TowerTray. Make sure you

 

 

 

utilize the locking mechanism on the tray’s and printer’s left side.

 

 

 

Arrangement of trays:

 

 

 

 

Tilt protections

 

The TowerTray Unit can only operate with TowerTray trays where-

 

 

 

 

 

as the HP LaserJet Unit can only operate with original HP trays.

 

 

 

Therefore it is essential not to mix TowerTray trays with the original

 

 

 

HP trays – TowerTray trays are easily distinguished by the

 

 

 

TowerTray Sticker on it’s front panel.

 

 

 

Note: The TowerTray Unit can consist of up to four trays (one

 

 

 

Bottom, two middle and one Top tray) .

 

 

Data Connection

 

 

 

Without Stacker

 

 

 

Connect printer and TowerTray with the data cable (see picture):

 

 

 

one end with the printer and the other end with TowerTray. Use the

 

 

 

provided Adapter as a intermediate piece (see picture next page).

 

 

 

 

 

 

 

 

Caution:

 

 

 

 

Only move TowerTray to another place with drawers closed and

 

 

 

 

without printer on top to avoid hazard of toppling. Do not roll the

 

 

 

 

TowerTray with more than 4 trays on top – remove any surplus

 

 

 

 

trays. Drawers need to be secured against unintentional opening.

 

 

 

 

Be careful when crossing doorsteps or different flooring materials.

 

 

 

 

Be sure that the trays interlocking mechanism are applied

 

 

 

 

 

 

 

 

Data-

Cabel position on unit without stacker – arrows indicating

Manual 0545

8

TowerTrayTM for the HP LaserJet 4200 / 4300 / 4250 / 4350

 

 

 

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Installation and Users Guide Page Table of Contents Manual TowerTrayTM for the HP LaserJet 4200 / 4300 / 4250 Preface TowerTray 221000 ⇒ Additional Trays ⇒ Part NoUnpacking Re-packingUnpacking BOX Contents Installation Remove Transportation InsertArrangement of trays Position and Connect PrinterData Connection Without Stacker With stacker Numbering of Trays Installation of Printer Driver Papertype AssignmentsConfiguring the TowerTray Option Upgrade for HP LaserJet 4250 How to turn the system onOperating Out of Paper Reloading PaperPaper Jam Input Accessory Paper Quality Guidelines GeneralHP LaserJet Duplexer Option Powersave Function Printer SettingAppendix a Printer Specific Notes Original HP 500-Sheet TrayPrinting on the wrong Paper Appendix B Tips & HintsPaper Control and Selection Creating Paper Sequences for a Word Document Example HP LaserJetMedia Type Original CopyMacro End Where to select Paper Size and Paper Type Appendix C Standard ApplicationsAppendix D PCL Paper Selection Commands ESCPos Appendix E TroubleshootingDiagnosing an Error Situation Printer Display TF Beeping Description Action / RemarksOther Error Conditions Pos Description Action / RemarksConfiguration Appendix F Printer Selftest PagesPlease refer to page 26 for more information on this 10/2.30 Appendix F Printer Selftest Pages TowerTray Selftest Feature Appendix G TowerTray SelftestAppendix H Cleaning and Maintenance Appendix I TowerTray Specifications Dimensions and Weights
Related manuals
Manual 4 pages 12.41 Kb
Top Page Image Contents