INSTALLATION
Adapter
Detail view of data cabel positioning
With stacker
•Connect stacker and TowerTray with the provided data cable (see picture): one end with the stacker and the other end with the TowerTray port. The data communication between TowerTray and printer takes place via stacker.
Note:
The adapter will not be needed in the configuration with stacker.
Caution:
Only move TowerTray to another place with drawers closed and without printer on top to avoid hazard of toppling. Do not roll the TowerTray with more than 4 trays on top – remove any surplus trays. Drawers need to be secured against unintentional opening. Be careful when crossing doorsteps or different flooring materials. Be sure that the tray interlocking mechanism is applied.
Manual 0545 | 9 | TowerTrayTM for the HP LaserJet 4200 / 4300 / 4250 / 4350 |
|
|
|