HP MPEGscope manual To Connect to the ASI and Serial ECL Dhei Interface, M2S Mode

Page 21

Getting Started

Connecting to Interfaces

To Connect to the ASI and Serial ECL (DHEI) Interface

The ASI (Asynchronous Serial Interface) and Serial ECL (Digital Head End Interface) includes two blue impedance converters for the ASI interface’s M2S mode and a DHEI Expansion In/Out Y-Adapter cable for the DHEI interface.

ASI Interface

E6277

ASI OUT

ASI IN

2Connect the output line to the ASI OUT port.

1Connect the input line to the ASI IN port.

M2S Mode

E6277

ASI OUT

ASI IN

2 Connect the BNC connector of the transmitter impedance converter to the ASI OUT port.

The transmitter impedance converter has a push–on SMB connector.

4Connect the SMB connector on the transmitter impedance converter to the SMB connector on the output line.

1 Connect the BNC connector of the receiver impedance converter to the ASI IN port.

The receiver impedance converter has a threaded SMA connector.

3Connect the SMA connector on the receiver impedance converter to the SMA connector on the input line.

2-7

Image 21

Contents MPEGscope Startup Guide Pentium Acrobat Printing history Copyright Warranty MPEGscope MicrosoftManual Name Product NumberIndicates that antistatic precautions should be taken Safety SymbolsCertification Additional Information for Test and Measurement EquipmentAvertissement Symboles de sécuritéAvertissement Cet instrument est conforme auxPage Page Page Contents Page Introduction For More Information How To Contact UsMaterials shipped with your MPEGscope system System to enable you to become quickly productiveIntroduction For More Information For More InformationHow To Contact Us Getting Started Starting an MPEGscope Test Session Software, refer to Appendix B, Reinstalling SoftwareGetting Started Starting an MPEGscope Test Session Getting Started Connecting to Interfaces Connecting to InterfacesGetting Started Connecting to Interfaces To Connect to the DVB-SPI Interface To Connect to the ASI and Serial ECL Dhei Interface M2S ModeConnect the Amplimite TM HD-22 Getting Started Connecting to Interfaces Dhei InterfaceDVB-SPI Rx To Connect to the Smpte 310M InterfacePort on the MPEGscope Main Board. Outspi To Connect to the Arib InterfaceGetting Started Connecting an External Clock Source Connecting an External Clock SourceConnecting an External Trigger Cable Setup dialog for instructionsTo see the list of relevant topics Getting Started Troubleshooting TroubleshootingSelect Start Technical A-2 General A-5 Line Interface A-6 SpecificationsTechnical Service information Specifications TechnicalSI in DVB systems BroadcastingStream, September CircuitsDecember 2000General Line Interface 16 Mb/s Type Biphase markClock 100 ns PacketsSPI 25b PinDHEId EXP INeGND Signal Arib in connectorPin ARIBa Data TPD7 MSB Data TPD6 Data TPD5 Page Reinstalling Software Reinstalling Software Reinstalling SoftwareReinstalling Software Performing a System Backup Performing a System BackupReinstalling Software Performing a System Restore Performing a System RestoreIndex-1 CablesTop margin for text Index-2