Step 9 – Change the Language Displayed on the Printer’s Control Panel
For the HP DesignJet ColorPro CAD printer, software supplied includes:
•ADI driver for AutoCAD
•
Follow the instructions supplied with the printer software.
Step 9 – Change the Language Displayed on the Printer’s Control Panel
You can change the printer’s control panel display to the following languages:
•English, German, French, Italian, Spanish, Norwegian, Dutch, Portuguese, Finnish, Swedish, Danish, Polish, Czech or Russian.
To do so:
1.Power off your printer.
2.Press and hold [Menu] and power on your printer.
3.Wait until the display shows “LANG=X” (where “X” is the current language setting and is in that language).
4.Release the [Menu] button.
5.Press [Value] to scroll through the language list.
6.Press [Select] to choose and confirm your language selection.
Step 10 – Install Additional Memory
If you find that the amount of memory in your printer is insufficient for your requirements, you can install additional memory modules.
CAUTION: Make sure the printer is switched off at the power isolator switch at the front of the printer, and that the power cord and the interface cable are disconnected.
•The memory expansion module contains electrical components that are easily damaged by small amounts of static electricity. Please read the following information carefully before you handle the memory expansion module:
HP DesignJet ColorPro Series: Getting Started Guide 11