Step 2 – Remove All Tapes from the Printer
Step 2 – Remove All Tapes from the Printer
1. Remove the four tapes securing the printer. Open the top cover and remove the fifth tape from the inside of the printer.
Step 3 – Connect Cables
1. Ensure that the computer is turned off.
2. Plug the power connector firmly into the printer’s power socket.
3. Plug the power plug into an electrical outlet.
4. Connect the printer end of the parallel cable firmly to the parallel port on the printer.
5. Snap both clips onto the notches on the connector.
Step 4 – Install Ink Cartridges
In the online edition, click to see a video clip of the following procedure:
1. Press the Power button to turn on the printer.
2. Lift to open the Ink Cartridge door.
HP DesignJet ColorPro Series: Getting Started Guide 5