HP ColorPro CAD C7777A Memory, Paper Handling, Paper Size Handling, Maximum Print Width, Weight

		Printer Specifications
Memory	4 Mbytes on main board
	Two 72-pin SIMM slots for additional memory (EDO, 60ns)
	expansion up to a total of 76 Mbytes
Paper Handling	Standard input capacity of 400 sheets through two trays of 150
	sheet and 250 sheet capacity.
	Standard output capacity of 150 sheets (face-up)
	Rear Manual feed – single sheet only
	Tray 1 (Input / Output Tray) – Sheets: up to 10, Cards: up to 4
	Tray 2 (Upper Tray) – Sheets: up to 150, Cards: up to 60
	Tray 3 (lower Tray) – Sheets: up to 250
	All input paths handle standard media sizes (as listed below) up
	to 13"x19" (Super A3)
	Additional, Tray 1 and the rear manual feed support media sizes
	as small as 4" x 6" (101.6mm x 152.4mm)
	Built-in media-size sensors prevent printing on the wrong type
	of media.
Paper Size Handling	Minimum Width: 76.2 mm (4 in.) x 127.0 mm (6 in.)
	Maximum Width: 330.2 mm (13 in.) x 482.6 mm (19 in.)
Maximum Print Width	320 mm (12.61 in.) x 470 mm (18.49 in.) on 13 in. x 19 in. media.
Recommended Media	All input paths handle the following paper weights with the rear
Weight	straight-through paper path handling up to 0.3mm thickness of
	paper
	Paper:	60 to 135 g/m2 (16 to 36 lb. Bond)
	Cards:	110 to 200 g/m2 (110 lb. Index)
	Straight-through path: up to 0.3 mm thickness (0.012 in.) /
		220 g/m2 (110 lb.Index)

HP DesignJet ColorPro Series: Getting Started Guide 17