English
Paper jam
1.Remove the paper from the paper tray.
2.If you are printing labels, verify that a label did not become detached from the label sheet while passing through the printer.
3.Turn off the printer.
4.Disconnect the printer power cord from the electrical outlet.
5.Remove the rear access door. Press the handle to the right, and then pull out the door.
6.Remove the paper jam from the back of the printer, and then replace the rear access door securely.
7.If the paper jam cannot be removed from the back of the printer, raise the printer cover, remove the paper jam from the front of the printer, and then lower the cover.
8.Reload paper in the paper tray.
9.Reconnect the printer power cord to the electrical outlet.
10.Turn on the printer.
11.Reprint the document.
Print job stuck in queue (Windows)
If the printer stops printing before the job is complete, the print job might be stalled in the print queue.
•Verify that you are using the default printer to print your documents. Check the Printers or Printers and Faxes folder on your computer and make sure your printer icon has
a check mark next to it. If you have multiple icons of the same printer, delete the extra icons.
•Make sure that your printer is not set to pause printing.
•If the print service has stopped responding, locate the Administrative Tools folder on your computer,
Ink usage
Note: Ink from the cartridges is used in the printing process in a number of different ways, including in the initialization process, which prepares the device and cartridges for printing, and in printhead servicing, which keeps print nozzles clear and ink flowing smoothly. In addition, some residual ink is left in the cartridge after it is used. For more information see www.hp.com/go/inkusage.
Minimum system requirements
For information on minimum system requirements,
see the Readme. To access the Readme file, click Start > All Programs > HP > Deskjet D4300 series > Readme.