QuickSpecs
HP StorageWorks 400t and 400r
Storage Systems
Technical Specifications
Specifications | Weight | All hard drives, power | 37.00 lb (16.78 kg) |
| |||
| (approximate) | supplies, and processors |
|
|
| installed |
|
| Input Requirements | Rated Line Voltage | 90 to 132 VAC, |
| (per power supply) |
| 180 to 264 VAC |
|
| Rated Input Current | 7.31A at 115VAC, |
|
|
| 3.6A at 230VAC |
|
| Rated Input Frequency | 47 to 63 Hz |
|
| Rated Input Power | 855W (at 100 VAC), |
|
|
| 840.72W (at 200 VAC) |
| Power Specifications | To review typical system power ratings use the Power Calculator which is | |
|
| available via the online tool located at URL: | |
|
| http://h30099.www3.hp.com/configurator/calc/Power%20Calculator | |
|
| %20Catalog.xls |
|
-Click on the system of interest. Example: DL380 G5
-Follow the instructions of the next screens.
Power Supply Output | Rated | 653.10W (at 100 VAC), |
(per power supply) |
| 653.08W (at 200 VAC) |
System Inlet TemperatureOperating | 50° to 95° F (10° to 35° C) at sea level with | |
|
| an altitude derating of 1.8°F per every 1000 ft |
|
| (1.0°C per every 305 m) above sea level to a |
|
| maximum of 10,000 ft (3050 m), no direct |
|
| sustained sunlight. Maximum rate of change is |
|
| 18°F/hr (10°C/hr). The upper limit may be |
|
| limited by the type and number of options |
|
| installed. |
|
| System performance may be reduced if |
|
| operating with a fan fault or above 86°F |
|
| (30°C). |
| 40° to 140° F | |
|
| Maximum rate of change is 36°F/hr |
|
| (20°C/hr). |
Relative Humidity | Operating | 10% to 85% relative humidity (Rh), 82.4°F |
| (28°C) maximum wet bulb temperature, non- | |
|
| condensing. |
| 10% to 95% relative humidity (Rh), 101.7°F | |
|
| (38.7°C) maximum wet bulb temperature, non- |
|
| condensing. |
Altitude | Operating | 10,000 ft (3050 m). This value may be limited |
|
| by the type and number of options installed. |
|
| Maximum allowable altitude change rate is |
|
| 1500 ft/min (457 m/min). |
| 30,000 ft (9144 m). Maximum allowable | |
|
| altitude change rate is 1500 ft/min (457 |
|
| m/min). |
Acoustic Noise | Listed are the declared | |
| declared average bystander position | |
| (LpAm) when the product is operating in a 23°C ambient environment. Noise | |
| emissions were measured in accordance with ISO 7779 (ECMA 74) and | |
| declared in accordance with ISO 9296 (ECMA 109). | |
| Idle |
|
| LWAd | 6.86 |
| LpAm | 52.36dBA |
| Operating |
|
| LWAd | 6.89 |
| LpAm | 52.60dBA |
|
|
|
DA - 12913 Worldwide QuickSpecs — Version 1 — 2.11.2008 | Page 20 |