HP rp5800 Retail System Trigger Hold Multiple Mode, Trigger Pulse Multiple Mode, Flashing Mode

Page 10
Trigger Hold Multiple Mode

Figure 2-2Trigger Single Mode

Trigger Hold Multiple Mode

When the trigger is pulled, scanning starts and the product scans until the trigger is released or a programmable duration has elapsed. Reading a label does not disable scanning. Double Read Timeout prevents undesired multiple reads while in this mode.

Trigger Pulse Multiple ModeFlashing ModeManual backgroundManual background NOTE: See the Programming Guide (PG) for additional programmable features. In this case: Scanning Active Time.

Double Read Timeout is also programmed using the PG.

Figure 2-3Trigger Hold Multiple Mode

Trigger Pulse Multiple Mode

When the trigger is pulled and released, scanning is activated until programmable duration has elapsed or the trigger has been pulled again to transition to another state. Double Read Timeout prevents undesired multiple reads while in this mode.

Manual backgroundManual backgroundManual backgroundManual background NOTE: See the Programming Guide (PG) for additional programmable features. In this case: Scanning Active Time.

Double Read Timeout is also programmed using the PG.

Figure 2-4Trigger Pulse Multiple Mode

Flashing Mode

The reader flashes on and off regardless of the trigger status.

Manual backgroundManual backgroundManual backgroundManual background NOTE: This is controlled by Flash On Time and Flash Off Time. Use the PG to program these options.

4 Chapter 2 Using the Scanner

ENWW

Page 9 Page 11
Image 10
Page 9 Page 11
Contents HP Linear Scanner Quick Reference Guide2011 Hewlett-Packard Development Company, L.P About This Guide iv About This Guide 2 Using the Scanner Table of contents1 Setting Up the Scanner Appendix A TroubleshootingChemical Substances Restriction of Hazardous Substances RoHS1 Setting Up the Scanner 2 Chapter 1 Setting Up the Scanner Scanning Modes 2 Using the ScannerParts of the Scanner Trigger Single ModeTrigger Pulse Multiple Mode Trigger Hold Multiple ModeFlashing Mode Trigger Object Sense Always OnStand Mode Figure 2-6 Always OnProgramming Barcodes Resetting the Product Configuration to DefaultsUSB Interface LED and Beeper Indications IndicationOnline Technical Support A TroubleshootingSolving Common Problems Preparing to Call Technical SupportError messages received Hardware configuration Hardware and software you are usingModifications B Agency Regulatory NoticesFederal Communications Commission Notice CablesAvis Canadien Canadian NoticeEuropean Union Regulatory Notice Japanese Notice Korean Notice Product Environmental Notices Materials DisposalChemical Substances HP Recycling ProgramRestriction of Hazardous Substances RoHS 2003 SJ/T11363-2006 RoHS 2002/95/EC
Related manuals
Manual 2 pages 57.17 Kb
Top Page Image Contents