HP VS803UT manual Removing Bezel Blanks, 5Removing a Bezel Blank Hardware Upgrades

Page 20

Removing Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to be removed before installing a drive. To remove a bezel blank:

1.Remove the access panel and front bezel.

2.To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it (2).

Figure 2-5Removing a Bezel Blank

14 Chapter 2 Hardware Upgrades

ENWW

Image 20

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Product Features Standard Configuration FeaturesFront Panel Components 1Front Panel ComponentsMedia Card Reader Components 2Media Card Reader ComponentsRear Panel Components 3Rear Panel ComponentsUsing the Windows Logo Key Keyboard4Keyboard Components 5Windows Logo Key FunctionsArrow Serial Number Location 6Serial Number and Product ID LocationHardware Upgrades Serviceability FeaturesUnlocking the Smart Cover Lock Smart Cover FailSafe Key1Removing the Smart Cover Lock Screw Removing the Computer Access Panel Replacing the Computer Access Panel 3Replacing the Access Panel Hardware UpgradesRemoving the Front Bezel 5Removing a Bezel Blank Hardware Upgrades Removing Bezel BlanksReplacing the Front Bezel 6Replacing the Front BezelUsing the Small Form Factor Computer in a Tower Orientation DDR3-SDRAM DIMMs Installing Additional MemoryDIMMs Populating Dimm Sockets 1DIMM Socket LocationsInstalling DIMMs 9Rotating the Drive Cage Up Hardware Upgrades Enww Removing or Installing an Expansion Card 2Expansion Slot Locations12Opening the Expansion Slot Retainer 13Removing an Expansion Slot Cover Hardware Upgrades 14Removing a Standard PCI Expansion Card Enww Enww Drive Positions 3Drive PositionsInstalling and Removing Drives 19Extra Guide Screw LocationsSystem Board Drive Connections 4System Board Drive ConnectionsRemoving an External 5.25-inch Drive Enww Installing an Optical Drive into the 5.25-inch Drive Bay 24Removing the 5.25-inch Drive26Installing the Optical Drive Hardware Upgrades Enww Removing an External 3.5-inch Drive 30Disconnecting the Media Card Reader USB Cable Installing a Drive into the 3.5-inch External Drive Bay Enww Enww 38Installing Hard Drive Guide Screws Removing and Replacing a Removable 3.5-inch Sata Hard Drive 41Removing the Thermal Sensor Enww Enww Enww Specifications Table A-1SpecificationsAppendix a Specifications Battery Replacement Type Enww HP/Kensington MicroSaver Security Cable Lock Installing a Security LockExternal Security Devices Padlock HP Business PC Security LockEnww Front Bezel Security Figure C-6Engaging the LockEnww Grounding Methods Electrostatic DischargePreventing Electrostatic Damage Computer Operating Guidelines and Routine Care Optical Drive Precautions CleaningSafety Shipping PreparationIndex ComputerEnww