HP VS803UT manual 14Removing a Standard PCI Expansion Card

Page 31

b.If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card straight up from the socket (1) then away from the inside of the chassis to release it from the chassis frame (2). Be sure not to scrape the card against the other components.

NOTE: Before removing an installed expansion card, disconnect any cables that may be attached to the expansion card.

Figure 2-14Removing a Standard PCI Expansion Card

ENWW	Removing or Installing an Expansion Card 25

Image 31

Contents Hardware Reference Guide Hardware Reference Guide About This Book Iv About This Book Table of contents Appendix D Electrostatic Discharge Standard Configuration Features Product Features1Front Panel Components Front Panel Components2Media Card Reader Components Media Card Reader Components3Rear Panel Components Rear Panel Components5Windows Logo Key Functions Using the Windows Logo KeyKeyboard 4Keyboard ComponentsArrow 6Serial Number and Product ID Location Serial Number LocationServiceability Features Hardware UpgradesSmart Cover FailSafe Key Unlocking the Smart Cover Lock1Removing the Smart Cover Lock Screw Removing the Computer Access Panel 3Replacing the Access Panel Hardware Upgrades Replacing the Computer Access PanelRemoving the Front Bezel Removing Bezel Blanks 5Removing a Bezel Blank Hardware Upgrades6Replacing the Front Bezel Replacing the Front BezelUsing the Small Form Factor Computer in a Tower Orientation DIMMs Installing Additional MemoryDDR3-SDRAM DIMMs 1DIMM Socket Locations Populating Dimm SocketsInstalling DIMMs 9Rotating the Drive Cage Up Hardware Upgrades Enww 2Expansion Slot Locations Removing or Installing an Expansion Card12Opening the Expansion Slot Retainer 13Removing an Expansion Slot Cover Hardware Upgrades 14Removing a Standard PCI Expansion Card Enww Enww 3Drive Positions Drive Positions19Extra Guide Screw Locations Installing and Removing Drives4System Board Drive Connections System Board Drive ConnectionsRemoving an External 5.25-inch Drive Enww 24Removing the 5.25-inch Drive Installing an Optical Drive into the 5.25-inch Drive Bay26Installing the Optical Drive Hardware Upgrades Enww Removing an External 3.5-inch Drive 30Disconnecting the Media Card Reader USB Cable Installing a Drive into the 3.5-inch External Drive Bay Enww Enww 38Installing Hard Drive Guide Screws Removing and Replacing a Removable 3.5-inch Sata Hard Drive 41Removing the Thermal Sensor Enww Enww Enww Table A-1Specifications SpecificationsAppendix a Specifications Battery Replacement Type Enww External Security Devices Installing a Security LockHP/Kensington MicroSaver Security Cable Lock HP Business PC Security Lock PadlockEnww Figure C-6Engaging the Lock Front Bezel SecurityEnww Preventing Electrostatic Damage Electrostatic DischargeGrounding Methods Computer Operating Guidelines and Routine Care Shipping Preparation Optical Drive PrecautionsCleaning SafetyComputer IndexEnww