Sterling 882.004400.00 specifications Setting Up the Water Balancing Valve, Initial Start-up

Page 16

3-6 Setting Up the Water Balancing Valve

Install the plug provided in the unused water inlet on the side of the tower. Tighten and check for leaks.

To prevent damage to the tower fill material, use the water throttling valve and pressure gauge to regulate the water pressure to the tower spray nozzle(s). The recommended throttling valve is a butterfly-type valve that can be locked in the correct position with a locknut. See Figure 6 for recommended throttling valve pressures.

Figure 6: Throttling Valve Pressures

Model

Pressure

 

 

 

 

 

 

psig

 

KPa

 

 

 

 

SF2003

10 psig

 

68.95

 

 

 

 

SF2004

7 psig

 

48.26

 

 

 

 

Sf2005

3 psig

 

10.68

 

 

 

 

SF2007

5 psig

 

34.47

 

 

 

 

SF2009

6 psig

 

41.37

 

 

 

 

SF2011

8 psig

 

55.16

 

 

 

 

SF2015

10 psig

 

68.95

 

 

 

 

Warning! Exceeding these pressure limits will damage the tower fill and nozzle and void the tower warranty.

3-7 Initial Start-up

Check for proper rotation on all fan and pump motors. Refer to the arrows atop the tower and on pump housings.

Fill the system with water and adjust the float valve if you are using a float. Maintain a water level in the tower basin approximately one inch (25 mm) below the overflow opening.

The tower basin acts as a sump to maintain water level. Towers using inside tanks do not carry water in the basin.

Fiberglass Cooling Towers

Chapter 3: Installation

Page 16 of 25

Image 16
Contents SF Series Fiberglass Cooling Towers Shipping Information Table of Contents Parts List Electrical Schematics List of Figures Structural Steel Support RequirementsHow to Use This Manual SafetySafety Symbols Used in this Manual Responsibility Standard Features Functional DescriptionModels Covered in This Manual General DescriptionOptional Features Installation Tower Installation LocationRoof Installation Ground InstallationStructural Steel Support Requirements Assembling the Cooling Tower in the Field Installing Piping Installing the Fan PackageRigging Cooling Tower with Tower Reservoir Piping Diagram Flexible PVC Outlet Coupler Setting Up the Water Balancing Valve Initial Start-upBleed-Off and Evaporation Rates OperationWinter Operation Considerations Maintenance Preventative MaintenanceRoutine Maintenance Water TreatmentCorrective Maintenance Replacing Nozzles and FillService Department Sales Department AppendixTechnical Assistance Parts DepartmentDrawings and Specifications Side ViewTower Performancec Nozzle 1D Parts List SF2004 SF2005 d SF2007 SF2009 SF2011 SF2015 Description QtyElectrical Schematics Typical Wiring Diagram

882.004400.00 specifications

The Sterling 882.004400.00 is a remarkable piece of technology that caters to various sectors including industrial applications, transport, and construction. Known for its robust design and innovative features, this equipment is engineered to improve efficiency and productivity while maintaining a high standard of reliability.

One of the main features of the Sterling 882.004400.00 is its powerful engine. This engine provides exceptional performance, enabling the machine to handle heavy workloads with ease. The capacity of the engine allows for quick acceleration and high torque, making it ideal for both short bursts of speed and prolonged use under load.

The machine incorporates advanced hydraulic technology which enhances its operational capabilities. The hydraulic system ensures smooth operation, allowing for precise control over various functions. This technology also contributes to the overall longevity of the equipment, reducing wear and tear over time, and minimizing maintenance requirements.

In terms of design, the Sterling 882.004400.00 is constructed with high-quality materials that promote durability and resilience. The chassis is both lightweight and sturdy, allowing for excellent maneuverability without compromising on strength. Its design also prioritizes operator comfort, featuring an ergonomic cabin that reduces fatigue during extended use.

The equipment comes with an array of safety features designed to protect both the operator and the machine. Advanced braking systems, safety alarms, and protective guards are incorporated to enhance operational safety. Additionally, the visibility from the operator’s cabin has been optimized to provide an unobstructed view of the working environment, which is essential for safe maneuvering.

Technologically, the Sterling 882.004400.00 is equipped with state-of-the-art control systems that promote ease of use. These systems allow users to fine-tune performance settings based on specific operational requirements, ensuring optimal functionality in various conditions.

Energy efficiency is another significant characteristic of this machine. It integrates technologies designed to minimize fuel consumption while maintaining high output. This not only reduces operational costs but also contributes to environmental sustainability.

In summary, the Sterling 882.004400.00 stands out in its category thanks to its powerful performance, advanced hydraulic technology, robust design, safety features, and commitment to energy efficiency. Whether in industrial or construction settings, this machine promises to enhance productivity while delivering the reliability that operators need.