HP NRM42 manual Configuring PC in Windows

Page 14

Configuring PC in Windows 2000

1.Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections.

2.Double-clickLocal Area Connection.

3.In the Local Area Connection Status window click Properties.

4.Select Internet Protocol (TCP/IP) and click Properties.

5.Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.

6.Click OK to finish the configuration.

12

Image 14

Contents ADSL2+ Modem/Router Model-nr. NRM42 Index Chapter Introducing the ADSL2+ RouterPage Features of the ADSL2+ Router Dynamic Host Configuration Protocol Dhcp client and server FirewallSimple Network Management Protocol Snmp Firmware UpgradeableRIP1/2 Routing Web based GUIImportant note for using the ADSL2+ Router Package ContentsLAN Port Wireless model only SYS PWRPPP Line Power Switch MeaningCabling Basic Installation Before ConfigurationSelect Internet Protocol TCP/IP and click Properties Configuring PC in Windows XPDouble-clickLocal Area Connection Configuring PC in Windows Select TCP/IP -NE2000 Compatible Configuring PC in Windows 98/MeGo to Start / Settings / Control Panel Configuring PC in Windows NT4.0 Select TCP/IP Protocol and click PropertiesFactory Default Settings Username and PasswordLAN and WAN Port Addresses Information from your ISPConfiguring with your Web Browser Configuration StatusQuick Start Set your new password Choose your time zone Set your Internet connection Page Restart your Adsl Router Interface Setup LAN, and WirelessInternet ATM VCEncapsulation PPPoE/PPPoADynamic Route 2 LAN Router Local IPPage For Wireless ADSL2+ Modem/router model only Wireless LANAdvanced Setting Wireless MAC Address FilterWEP Advanced Setup RoutingADD Route 2 NAT DMZ Virtual Server IP Address Mapping Rule Type Page Adsl Access Management 1 ACLIP Filter IP Filter Listing Or IcmpSnmp UPnP Ddns Maintenance AdministratorTime Zone Firmware SysRestart Diagnostics Device Information StatusDevice Info Adsl System Log Statistics EthernetAdsl Linesync failed Problem Corrective Action InitializationPVC connection Problem Can’t ping any PCs on the LAN Corrective Action Frequent loss of Adsl linesync disconnections