HP NRM42 manual Features of the ADSL2+ Router

Page 5

1.2 Features of the ADSL2+ Router

ADSL Multi-Mode Standard

supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It also supports rate management that allows ADSL subscribers to select an Internet access speed suiting their needs and budgets. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2)), G.hs (G994.1), G.dmt.bis (G.992.3), G.dmt.bisplus (G.992.5)). The Annex A and B are supported in different H/W platforms.

Wireless Ethernet 802.11g (Option with wireless router model)

With built-in 802.11g access point for extending the communication media to WLAN while providing the WEP, WPA and WPA2 for securing your wireless networks.

Fast Ethernet Switch

A 10/100Mbps fast Ethernet switch is built in with automatic switching between MDI and MDI-X for 10Base-T and 100Base-TX ports. An Ethernet straight or cross-over cable can be used directly for auto detection.

Multi-Protocol to Establish a Connection

Supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM (bridged or routed), PPP over Ethernet (RFC 2516) and IPoA (RFC1577) to establish a connection with the ISP. The product also supports VC-based and LLC-based multiplexing.

Quick Installation Wizard

Supports a WEB GUI page to install this device quickly. With this wizard, end users can enter the information easily which they get from their ISP, then surf the Internet immediately.

Universal Plug and Play (UPnP) and UPnP NAT Traversal

This protocol is used to enable simple and robust connectivity among stand-alone

devices and PCs from many different vendors. It makes network simple and affordable for users. UPnP architecture leverages TCP/IP and the Web to enable seamless proximity networking in addition to control and data transfer among networked devices. With this feature enabled, users can now connect to Net meeting or MSN Messenger seamlessly.

Network Address Translation (NAT)

Allows multi-users to access outside resources such as the Internet simultaneously with one IP address/one Internet access account. Many application layer gateways

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ADSL2+ Modem/Router Model-nr. NRM42 Index Introducing the ADSL2+ Router ChapterPage Features of the ADSL2+ Router Firewall Dynamic Host Configuration Protocol Dhcp client and serverRIP1/2 Routing Firmware UpgradeableSimple Network Management Protocol Snmp Web based GUIPackage Contents Important note for using the ADSL2+ RouterLAN Port Wireless model only SYS PWRPPP Meaning Line Power SwitchCabling Before Configuration Basic InstallationSelect Internet Protocol TCP/IP and click Properties Configuring PC in Windows XPDouble-clickLocal Area Connection Configuring PC in Windows Select TCP/IP -NE2000 Compatible Configuring PC in Windows 98/MeGo to Start / Settings / Control Panel Select TCP/IP Protocol and click Properties Configuring PC in Windows NT4.0Username and Password Factory Default SettingsInformation from your ISP LAN and WAN Port AddressesConfiguring with your Web Browser Status ConfigurationQuick Start Set your new password Choose your time zone Set your Internet connection Page Restart your Adsl Router LAN, and Wireless Interface SetupATM VC InternetPPPoE/PPPoA EncapsulationDynamic Route Router Local IP 2 LANPage Wireless LAN For Wireless ADSL2+ Modem/router model onlyWireless MAC Address Filter Advanced SettingWEP Routing Advanced SetupADD Route 2 NAT DMZ Virtual Server IP Address Mapping Rule Type Page Adsl 1 ACL Access ManagementIP Filter Or Icmp IP Filter ListingSnmp UPnP Ddns Administrator MaintenanceTime Zone Firmware SysRestart Diagnostics Device Information StatusDevice Info Adsl System Log Ethernet StatisticsAdsl Linesync failed Problem Corrective Action InitializationPVC connection Frequent loss of Adsl linesync disconnections Problem Can’t ping any PCs on the LAN Corrective Action
Top Page Image Contents