Quick Install
Quick Install
Installing the Appliance
Horizontal Surface Mounting
Place the ProCurve NAC 800 on a table or other horizontal surface. The unit comes with rubber feet in the accessory kit that can be used to help keep it from sliding on the surface.
Attach the rubber feet to the four corners on the bottom of the box within the embossed angled lines. Use a sturdy surface in an uncluttered area. You may want to secure the networking cables and switch power cord to the table leg or other part of the surface structure to help prevent tripping over the cords.
C a u t i o n | Make sure the air flow is not restricted around the sides and back of the unit. |
3. Connect the Unit to a Power Source
1.Plug the included power cord into the ProCurve NAC 800’s power connector and into a nearby AC power source.
Connect power cord to power connector