HP 800 Network Access Controller manual Initial Appliance Configuration

Quick Install

Installing the Appliance

6. Initial Appliance Configuration

When you first power up the ProCurve NAC 800 appliance, you can use the LCD menu and buttons on the front panel to set the IP address for the unit. These same functions are available via the Console menu.

1.To access the Console Menu, connect a console and login to the ProCurve NAC using the default administrator account:

Login = admin Password = procurve

The Application Main Menu will display.

2.Select the Config menu, then the IP Address-Port 1 option.

3.Enter the following information:

•IP address you want to assign to the ProCurve NAC.

•Subnet Mask

•Default Gateway

4.When you have completed the configuration, you can exit the console menu.

You can also use the console menu to access basic diagnostics (Ping Test), to change the appliance (administrator) password, and to reset the unit.

The remaining configuration tasks for deploying the RADIUS server and connecting the IDM Agent with the PCM/IDM server, are described in the ProCurve NAC 800 Configuration Guide, available on the Web at www.procurve.com.

Quick Install

2-11