Quick Install
Installing the Appliance
b.To move to the next number in the entry, press the X button to move right, or the W button to move left. Press once for each number space you want to move. The underscore ( _ ) indicates the selected number.
c.When the IP address is set correctly, press the 3 button to apply the new IP address, and continue to the Subnet Mask configuration.
2.To change the Subnet Mask entry, use the same procedure described in steps a. and b. above.
When the Subnet Mask is set correctly, press the 3 button to apply the new entry, and continue to the Default Gateway configuration.
3.To change the Gateway entry, use the same procedure described in steps a. and b. above, then press the 3 button to apply the new entry, and
continue.
4.The IP address is verified and a confirmation message displays if it is configured correctly.
After five seconds, the Configuration menu displays again.
If any part of the address is misconfigured, an error message displays.
After five seconds the display returns to the point where the first misconfiguration was detected.
Repeat the process for setting the IP address, Subnet Mask, and Gateway until the address is verified.