HP 13-3001xx Ultrabook, 13-3010dx Ultrabook manual Component replacement procedures, Feet

Component replacement procedures

This chapter provides removal and replacement procedures.

There are as many as 103 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement.

Feet

Description	Spare part number
Rubber Kit	744375-001

Before removing the feet, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

Remove the feet:

1.Position the computer upside-down.

2.Lift/pry to disengage the adhesive that secures the feet to the bottom cover.

Reverse the removal procedures to install the feet.

28 Chapter 4 Removal and replacement procedures