Display assembly
Description | Spare part number |
|
|
|
|
|
|
Before removing the display assembly, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 29).
5.Disconnect the battery.
6.Disconnect the antennas from the WLAN module (see WLAN module on page 32). Remove the display assembly:
1.Remove the Mylar tape from atop display cable connector (1)
34 | Chapter 4 Removal and replacement procedures |