3.Remove the speakers (3).
Reverse this procedure to install the speakers.
Power button board
Description | Spare part number |
|
|
Power button board (includes cable) | |
|
|
Before removing the power button board, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the keyboard/top cover (see Keyboard/top cover on page 30).
5.Remove the battery (see Battery on page 34).
Remove the power button board:
1.Release the ZIF connector (1) to which the power button board cable is attached, and then disconnect the power button board cable from the system board.
2.Remove the Phillips PM2.4×3.7 screw (2) that secures the power button board to the bottom cover.
Power button board 41