mSATA solid-state drive
Description |
| Spare part number |
|
|
|
mSATA | GB drive (for use with computer models with Intel processors, not | |
supported on Ubuntu Linux) |
|
|
|
|
|
mSATA | GB drive (for use with computer models with Intel processors) | |
|
|
|
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
Before removing the mSATA solid state drive, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 42).
5.Remove the keyboard (see Keyboard on page 46).
6.Remove the top cover (see Top cover on page 50).
7.Remove the hard drive (see Hard drive on page 54).
8.Remove the USB board (see USB board/audio jack on page 57).
9.Remove the WLAN (see WLAN module on page 58).
10.Remove the system board (see System board on page 61).
Remove the mSATA drive:
1.Turn the system board upside down, with the front toward you.
70 Chapter 5 Removal and replacement procedures