Power connector
Description | Spare part number |
|
|
Power connector |
|
|
|
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
Before removing the power connector, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 42).
5.Remove the keyboard (see Keyboard on page 46).
6.Remove the top cover (see Top cover on page 50).
7.Remove the hard drive (see Hard drive on page 54).
8.Remove the USB board (see USB board/audio jack on page 57).
9.Remove the WLAN (see WLAN module on page 58).
10.Remove the system board (see System board on page 61).
11.Remove the display assembly (see Display assembly on page 78).
Remove the power connector:
NOTE: The power connector screw and bracket were removed during the process to remove the system board.
▲Lift out the power connector to remove it from the base enclosure.
Reverse these procedures to replace the power connector.
84 Chapter 5 Removal and replacement procedures