2.Remove the two top screws (1) and two bottom screws (2) from the display bracket and lift the display brackets (3) to remove them.
3.If it is necessary to replace the display panel cable:
a.Gently remove the cable from the routing clips (1).
b.Detach and release the cable (it is attached to the back cover with
4.If it is necessary to replace the wireless antenna cables and transceivers:
a.Release the wireless antenna cables from the clips (1) built into the back cover.
b.Release the wireless antenna transceivers from the back cover. (The wireless antenna transceivers are attached to the back cover with
82 Chapter 5 Removal and replacement procedures