Mode Parameter Setting range | Sterling 90-225 CFM, SDA 150-380

Level 1		AL-2 Alarm Value 2		-1999 to 9999 EU			0	25.0
Level 1		AL-3 Alarm Value 3		-1999 to 9999 EU			0	Default
Level 1		P Proportional Band		0.1 to 999.9% FS			10.0	4.4
Level 1		I Integral Time		0 to 3999 SEC			233	84
Level 1		d Derivative Timer		0 to 3999 SEC			40	13
Level 1		C-SC Cooling		0.01 to 99.99			1.00	Default
		Coefficient
Level 1		C-db Dead Band		-19.99 to 99.99%FS			0.00	Default
Level 1		6F-r Manual Reset		0.0 to 100.0%			50.0	Default
		Value
Level 1		HYS Hysteresis (Heat)		0.01 to 99.99%FS			0.10	Default
Level 1		CHYS Hysteresis (Cool)		0.01 to 99.99%FS			0.10	Default
Level 1		CP Control Period		1 to 99 SEC			20	Default
		(Heat)
Level 1		C-CP Control Period		1 to 99 SEC			20	Default
		(Cool)

Mode		Parameter			Setting range	Default		Factory
								setting
Level 2		r-L Remote/Local			RMT/LCL		LCL	Default
Level 2		SPrU Sp Ramp Time Unit			M(Minutes)/H(Hours)		M	Default
Level 2		SPrE Sp Ramp Set Value			0 to 9999 EU		0	Default
Level 2		LbA LBA Detection Time			0 to 9999 SEC		0	Default
Level 2		Au-5 MV at Stop			-5.0 to 105.0%		0.0	Default
Level 2		Au-E MV at PV Error			-5.0 to 105.0%		0.0	Default
Level 2		6L-L MV Upper Limit			MV Lower Limit +0.1 to 105.0%		105.0	Default
Level 2		6L-L MV Lower Limit			-5.0 to MV Upper Limit –0.1%		-5.0	Default
Level 2		6rL MV Change Rate Limit			0.0 to 100.0%/SEC		0.0	Default
Level 2		CnF Input Digital Filter			0 to 9999 SEC		0	Default
Level 2		ALH1 Alarm 1 Hysteresis			0.01 to 99.99%		0.02	Default
Level 2		ALH2 Alarm 2 Hysteresis			0.01 to 99.99%		0.02	Default
Level 2		ALH3 Alarm 3 Hysteresis			0.01 to 99.99%		0.02	Default
Level 2		Cn5H Input Shift Upper			-199.9 to 999.9 °C		0.0	Default
		Limit
Level 2		Cn5L Input Shift Lower			-999.9 to 999.9 °C		0.0	Default
		Limit

Mode	Parameter				Setting range		Default	Factory
								setting
Setup	Cn-E Input Type		0 to 21				2	3
Setup	Cn-H Scaling Upper		Scaling Lower Limit +1 to 9999 EU				-100	Default
		Limit
Setup	Cn-L Scaling Lower		-1999 to SP Setting Upper Limit -0.1 EU				0	Default
		Limit
Setup	dP Decimal Point		0 to 3				0	Default
Setup	d-U °C/F Selection		°C/F				°C	°F
Setup	CnCE Parameter		Yes/No				No	Default

Cabinet Series Dehumidifying Dryer

SDA 150-380, 90-225 CFM specifications

The Sterling 90-225 CFM and SDA 150-380 series represent cutting-edge advancements in air compressor technology, designed for a wide range of industrial applications. Known for their reliability, efficiency, and superior performance, these units are essential tools for professionals seeking high-quality compressed air solutions.

One of the standout features of the Sterling 90-225 CFM series is its impressive flow rate. With a capacity range of 90 to 225 cubic feet per minute, these compressors offer ample airflow to power pneumatic tools and equipment while maintaining optimal pressure levels. The durability of the components used in the construction of this series ensures that it can withstand the rigors of heavy-duty operations while minimizing downtime.

The SDA 150-380 series further enhances this approach with its higher capacity range, accommodating between 150 to 380 CFM. This variant is particularly suitable for larger facilities and demanding applications where sustained airflow is essential. Both series are designed to adapt to various pressure requirements, making them versatile solutions for different industries, including manufacturing, construction, and automotive sectors.

A key technology featured in both series is the use of energy-efficient motors, which significantly reduce operational costs. These motors are designed to deliver high torque at low speeds, ensuring smooth operation and less wear on the compressor. Furthermore, the incorporation of advanced control systems allows for real-time monitoring and adjustments to optimize performance, ensuring that the compressors operate within desired parameters continuously.

Noise reduction is another critical aspect of both the Sterling and SDA series. Innovatively engineered with sound-attenuating materials, these compressors operate at lower decibel levels, providing a more pleasant working environment. This focus on user comfort doesn’t sacrifice performance, as the units are built to achieve maximum efficiency even at reduced noise levels.

The ease of maintenance is another important characteristic. Both models are equipped with user-friendly access points for essential components, simplifying routine checks and servicing procedures. This results in less downtime and improved reliability across the operational lifespan of the compressors.

In conclusion, the Sterling 90-225 CFM and SDA 150-380 series compressors set a benchmark in the industry, offering a blend of performance, efficiency, and user-friendly features that cater to various industrial needs. Their robust construction, advanced technology, and focus on user comfort make them ideal choices for businesses seeking to enhance productivity and reduce operational costs.

Mode

Parameter

Setting range

setting

RMT/LCL

Cabinet Series Dehumidifying Dryer

SDA 150-380, 90-225 CFM specifications