Sterling SDF 500, SDF 400, SDF 250 manual STT 25 STT

Page 71

STT 25 – STT 6400

Pos.

ID

Description

1Radiator hopper heater

85343 1.5 kW

85338 3.0 kW

85363 6.0 kW

85651 9.0 kW

95828 18.0 kW, 27.0 kW, 36.0 kW, 63.0 kW

87094 27.0 kW, 48.0 kW, 63.0 kW

218232 Hand flap Ø 80

92241 Tension ring

216523 Hand flap Ø 150 (> TT 1200)

96099 Tension ring

94231 Dichtring

306925 Flow indicator Ø 80

92241 Tension ring

94233 Sealing ring (optional, if flap in use)

307418 Flow indicator Ø 150

96099 Tension ring

94231 Sealing ring (optional, if flap in use)

416517 Motor flap Ø 80

92241 Tension ring

28923 Cable set

416522 Motor flap Ø 150

96099 Tension ring

28923 Cable set

505646 Hose

696118 Pipe

795409 Hose clamp

884148 Hose clamp

984144 Hose clamp

1030308 Flap

92241 Tension ring

94233 Sealing ring

1130335 Material outlet

92241 Tension ring

94233 Sealing ring

1228000 Suction box with 1 suction tube

27985 Suction box with 3 suction tubes

92241 Tension ring

94233 Sealing ring

5

Image 71

Contents Sterling Material Processing SDF 250/400/500 SDF 250/400/500 Table of contents 10-1 General Information SDF 250/400/500 SDF 250/400/500 Fields of applications Explanations and informationLegal basis Safety instructions General Operation AssemblyMaintenance For the safety of the devices Start up Touch Screen Control UnitSwitching on the Dryer Entering Dryer Values Basic parametersDew point Act Heater Reg. ActExit air Act Dew point maxEntering hopper values Drying time Target Hopper temp TargetHopper temp Act Granule TempSetting the timer Timer is only operating, when the dryer is switched on Actual operation status Actual hopper temperature displayed in C Status dryerObserving processing status Setting date and time Changing language SDF 250/400/500 Continuous operation SDF 250/400/500 Start up Switching the dryer/hopper heater off Error and error correction LED Alarm Actual messages Excess Temperature Return Air Error Bypass FlapError Valve Block Temperature Measurement Outgoing Air DefectiveExcess Temperature Granules Hopper Excess Temperature Heater HopperInsufficient Temperature Heater Hopper Temperature Measurement Granules Defective HopperOverload Drying Heater STB has been activated Main switch hopper heater # Controller is offOverload Regeneration Heater STB has been activated Alarm protocol Maintenance SDF 250/400/500 Maintenance schedule Cleaning or Replacing the Air Filter SDF Dryer Cleaning or Replacing the Return Air FilterCleaning or Replacing the Regeneration air filter Filter of the electrical cabinet Disposing of Drying Agents Cleaning the Drying Hopper STT Remove any granules remaining in the cleaning openingSTT 60 Notch on the battery connector must point to the left Changing the battery of the control systemSDF 250/400/500 Resetting the control values Functional description General Information Dew point dependent regeneration switch optionalHopper heaters optional Drying Hopper OptionalReturn Air Cooler Optional Connection to a Pneumatic Conveying System OptionalTransport, Assembly and Storage Transport with a fork lift truck Tansport and PackingTransport with a workshop crane Storage AssemblyAssembly instructions Connection of Return Air Cooler Optional Electrical Connection Compressed Air Supply Performance Technical dataBasic Version Optional EquipmentSDF 250/400/500 Accessories Accessories Spare parts list Drying Hoppers STT 25 STT STT 25 STT STT 25 STT STT 25 STT STT 25 STT STT 25 STT