Hardware Upgrades and Replacements
Removing or Inserting a Memory Module
ÅWARNING: To reduce the risk of electrical shock and damage to the equipment unplug the power cord, and remove all battery packs before installing a memory module.
ÄCAUTION: Electrostatic discharge (ESD) can damage electronic components.Before beginning any procedure, be sure that you are discharged of static electricity by touching a grounded metal object. For more information, refer to the Electrostatic Discharge guide, which is located in the Help and Support Center.
1.Save your work and close all open applications.
2.Shut down the computer.
If you are unsure whether the computer is off or in hibernation, turn the computer on, and then shut it down through the operating system.
3.Disconnect all external devices connected to the computer.
4.Disconnect the computer from external power.
5.Remove the battery pack.
For instructions, refer to the “Inserting or Removing a Battery Pack” section in Chapter 3, “Power.”
Hardware and Software Guide |