HP V2628TN, V2630TN, V2629TN, V2620TN Initiating or Resuming from Standby, Task Procedure Result

Power

Initiating or Resuming from Standby

Task	Procedure	Result
Initiate standby.	With the computer on, use any of	■ Power lights blink.
	the following procedures:	■ Screen clears.
	■ Press the fn+f5 hotkey.
	■ Close the computer.
	■ Select Start > Turn Off
	Computer > Stand by.
	In Windows XP Professional,
	if Stand by is not displayed:
	1. Press the down arrow.
	2. Select Stand by from the
	drop-down list.
	3. Click OK.
Allow the system	No action is required. The system	■ Power lights blink.
to initiate	initiates standby	■ Screen is cleared.
standby.
	■ After 10 minutes of inactivity
	while running on battery power.
	■ After 25 minutes of inactivity
	while running on external power.
Resume from	Press the power button.*	■ Power lights are
standby.		turned on.
		■ Your work returns
		to the screen.

*Depending on your computer configuration, you may also be able to resume from standby by moving or activating a control on an optional mouse or by opening the display if the computer was closed while in standby.

Hardware and Software Guide 3–11