Power
If you use the computer occasionally during the discharge process described below and
■Any unsaved work from your current session will be lost when the battery pack is fully discharged and the computer is shut down.
■The system will not turn off a connected optional monitor.
■The system will not decrease hard drive speed while the computer is idle.
■
To fully discharge the battery pack:
1.Disable hibernation. To disable hibernation:
Select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. Then clear the Enable hibernation check box.
2.Display the settings on the Power Schemes tab. To access the Power Schemes tab:
Select Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab.
3.Record all settings in the Plugged in column and all settings in the Running on batteries column, so you can reset them after calibration.
4.Use the
5.Click OK.
6.Disconnect the computer from the external power source, but do not turn off the computer.
7.Run the computer on battery power until the battery pack is fully discharged. The battery light begins to blink when the battery pack has discharged to a
Hardware and Software Guide |