Multimedia
Removing an Optical Disc (Without Power)
If external or battery power is unavailable:
1.Insert the end of a paper clip 1 into the release access in the front bezel of the drive.
2.Press in gently until the tray is released, and then pull out the tray 2.
3.Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Hold the disc by the edges and avoid touching the flat surfaces.
✎If the media tray is not fully accessible, tilt the disc carefully as you remove it.
4. Close the media tray and place the disc in a protective case.
Hardware and Software Guide |